Gateway MS2370 Keyboard Replacement

Escrito Por: Mathieu Bolduc-Clayton
  • Comentarios: 1
Gateway MS2370 Keyboard Replacement

Dificultad

Easy

Pasos

9

Tiempo Requerido

10 minutos

Introducción

This guide shows the user how to properly remove the keyboard from the Gateway MS2370 Laptop.

Herramientas

  1. vJst2HTWFMUkJpOl

    • Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

  2. PYadcH6QmlO1VU4a

    • Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

  3. ZADa32LcCKeJifBj

    • Pull the battery from the laptop to remove it.

  4. ZGBjfYcNFXu2jBPY

    • Take the plastic spudger and pull up the tabs on all four sides of the keyboard molding.

  5. rnZfAo3NURDWCCdy

    • Carefully lift the keyboard molding out.

  6. XaPmfrRWSPACkNxg

    • Use the plastic spudger again to pry the keyboard tabs from the laptop.

  7. j5iPXXNLiNVarJ6T

    • Slowly lift the keyboard from the laptop.

  8. 3d2ETN4GJdFvhKkw
    3d2ETN4GJdFvhKkw
    PYcrACIrs5KxsQM3

    • Carefully unplug the ribbon cable attached to the motherboard.

    • The ribbon cable is extremely delicate, handle with care

    Before you pull the ribbon out, make sure you unlock the white little tabs on the side of the connector ;)

    Ric Jim Urcid -

  9. CSYwk3biEtLBaJkM

    • Lift and remove the keyboard from the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Mathieu Bolduc-Clayton

Miembro Desde 17/10/17

518 Reputación

0 comentarios