Ion Air Pro Power Button Replacement

Escrito Por: Christopher Brandl
  • Comentarios: 0
Ion Air Pro Power Button Replacement

Dificultad

Moderate

Pasos

5

Tiempo Requerido

9 - 10 minutos

Introducción

Is your camera not turning on or turning off? Consider using this guide to replace the power button of your device.

  1. UfWBBdaZrbodMtsB

    • Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. yZQcoTXX3fjaJJXx

    • Slide off the black aluminum casing.

  3. LjESED1dmq4jWw1X

    • Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.

    • A spring is being held down by the screw. be sure to hold it down.

  4. NlG3ROfAkrFBhaJr

    • Lift off the plastic part holding the power button in place.

  5. MDbSSxRowsBANFUc

    • Remove the power button from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Christopher Brandl

Miembro Desde 09/10/18

673 Reputación

0 comentarios