Kinki Sharyo SLRV
The Kinki Sharyo Super Light Rail Vehicle (SLRV) is a light rail vehicle manufactured by Kinki Sharyo, operated by Dallas Area Rapid Transit (DART), and modified jointly by the two companies.[3][4]
| Kinki Sharyo SLRV | |
|---|---|
![]() | |
![]() | |
| In service | 1996–present |
| Manufacturer | Kinki Sharyo |
| Constructed | 1996–2013 |
| Entered service | June 14, 1996 |
| Refurbished | 2008–2010 |
| Number built | 163 |
| Capacity | 94 passengers (seated), 274 (crush load) per car[1] |
| Operator(s) | DART |
| Specifications | |
| Car body construction | LAHT |
| Train length | 494 ft (150,572 mm) |
| Car length | 123.5 ft (37,643 mm) |
| Width | 8.83 ft (2,692.4 mm) |
| Height | 12.5 ft (3.81 m) |
| Floor height |
|
| Platform height | 16 in (406 mm) |
| Entry | Level boarding and steps |
| Doors | Sliding pocket type; 5 per side[2] |
| Articulated sections | 3 (two articulations) |
| Wheel diameter | 28.0 in (711 mm) |
| Wheelbase |
|
| Maximum speed | 70 mph (112 km/h) |
| Weight | 140,000 lb (64 t) |
| Traction system | |
| Traction motors | 4 × 3-phase AC induction motor
|
| Power output |
|
| Acceleration | 2.3 mph/s (1.0 m/s2) |
| Deceleration | 3 mph/s (1.3 m/s2) |
| Electric system(s) | Overhead line, 750 V DC |
| Current collector(s) | Pantograph |
| AAR wheel arrangement | Bo-2-2-Bo |
| Minimum turning radius | 82 ft (25 m) |
| Coupling system | Tomlinson/Wabtec |
| Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
| Notes/references | |
| [1] | |
Description
The SLRVs are longer and can accommodate more passengers than the Kinki Sharyo-built vehicles from which they were developed, known by DART as its standard Light Rail Vehicles (LRVs),[3] which had been operated by DART Light Rail since it began service in June 1996.[5] DART's original LRVs were built as articulated, two-section cars with operator cabs at both ends.[4]
The SLRVs were designed to both increase passenger capacity and to improve the accessibility of DART's light rail system.[6] Each three-section, articulated SLRV measures 123.5 feet (37,643 millimeters) over couplers, while the maximum train length is four articulated cars coupled together, measuring 494 feet (150,572 mm) over couplers in total.[1] An individual SLRV is 31 feet (9.4 m) longer and 33,000 pounds (15,000 kg) heavier than the standard LRVs from which they were developed, which were each 92 feet 8 inches (28.24 m) in length and weighed 107,000 pounds (49,000 kg).[3] The SLRVs have a maximum speed of 70 miles per hour (112 kilometers per hour) and can accelerate at a rate of 2.3 mph per second (1.03 m/s2).[1]
Partnership
Working in partnership, DART and Kinki Sharyo created the SLRVs by separating the existing two-section LRVs at their articulation joints and inserting an entirely new section in between,[3][7] thereby rendering them three-section vehicles.[8] The resulting SLRVs are double-articulated, eight-axle cars, in comparison to the single-articulated, six-axle design of the original LRVs.[5] Each SLRV seats 98 passengers and can accommodate roughly 100 more standing passengers, which allows it to accommodate approximately 25 more seated people (and roughly 50 more overall) than a standard, two-section LRV.[1][3]
The middle section, variously called "Body C",[4] "C Unit", or "C Car",[9] has a low floor and provides step-free access to the SLRV.[9] It was designed primarily to allow passengers in wheelchairs,[9] as well as those with strollers and bicycles, to embark and disembark more quickly and safely.[3][4] Each SLRV middle section is also equipped with a bicycle rack.[4]
Prototype
In 2002, the prototype SLRV, car #170, began operating on DART's Blue Line. On June 23, 2008, car #151 became the first SLRV to enter revenue service. DART converted all 115 of its LRVs into SLRVs at a total cost of approximately $190 million,[3] which was more cost effective than buying entirely new light rail vehicles.[3][7] G. James Morgan of LTK Engineering Services estimated that DART saved over $50 million by converting its LRVs instead of buying new accessible vehicles.[5]
Conversion of an individual LRV into an SLRV took roughly five weeks,[3][5] with a sixth week for inspection and testing and the vehicle in main line operation by the next week.[5] By March 2010, 84 of DART's 115 LRVs had been converted into SLRVs,[5] and by August 2014, DART was operating a total of 163 SLRVs: all 115 converted LRVs in addition to 48 new vehicles.[1][8]
DART also modified its light rail platforms between 2007 and 2010, raising some areas of the platforms and removing all raised wheelchair platforms located at the ends of the stations. This accommodated the greater overall length and low-floor middle sections of the SLRVs.[7]
References
- "Kinkisharyo SLRV Technical Data Sheet" (PDF). Retrieved July 4, 2019.
- "DART Rail Facts". Retrieved January 27, 2019.
- "Super Light Rail Vehicles (SLRV) Facts". Dallas Area Rapid Transit. October 29, 2010. Retrieved June 5, 2016.
- Nakazawa, Akihisa. "DART: Dallas Area Rapid Transit" (PDF). Kinkisharyo International, LLC. Retrieved June 5, 2016.
- Morgan, G. James. "DART Super Light Rail Vehicles Low Floor Center Section: The Final "Successful" Chapter" (PDF). LTK Engineering Services. Retrieved June 5, 2016.
- "Success Stories: Dallas Area Rapid Transit". Kinkisharyo International, LLC. Retrieved June 5, 2016.
- Lew, Alexander (June 25, 2008). "Dallas Introduces "Super Light Rail Vehicles"". Wired. Retrieved June 5, 2016.
- Dixon, Scott (August 24, 2014). "Japanese companies ride U.S. light rail boom". The Japan Times. Retrieved June 5, 2016.
- Latham, Garl (2006). "Rapidly Improving Transportation". Progressive Engineer. Archived from the original on January 26, 2015. Retrieved June 5, 2016.

